Sheaves & Pulleys

For use with UT8, UT5, 6001, UT4 and UT2 cable pullers. Strong, welded steel frames. Forged steel closure type hooks with 1.000 IN (25.400 MM) opening. All three sheaves are aluminum alloy with self-lubricating bearings.

GABS-8512 SHEAVE 12IN 1/BOX 1BOXS/MASTER GARDNER BENDER

2x faster setup and disconnect. No loose pieces. Quick adjust push button to tightly fasten onto tray. 4 conveyer roller guide with retained spring pull-pin release to easily remove cable. Closed conveyer roller guide that traps cable within guide without damaging cable jacket. Easily handle forces

Feeding Sheave for 6" Conduit. Yoke frame slides into the end of conduit and holds sheave, allowing the cable being fed into the conduit to smoothly roll over the sheave. 5" (127.0 mm) wide aluminum alloy sheave with self-lubricating bearings. Split tube for easy removal after cable is installed.

Hook-Type Sheave 4,000 Pound Capacity. 6" (152.4 mm) hook sheave with 1-1/2" (38.1 mm) minimum radius. Strong, welded steel frames. Forged steel closure-type hooks with 1" (25.4 mm) opening. 5" (127 mm) wide aluminum alloy sheaves with self-lubricating bearings. Select a sheave with a maximum rated

Feeding Sheave for 2" Conduit. Yoke frame slides into the end of conduit and holds sheave, allowing the cable being fed into the conduit to smoothly roll over the sheave. 5" (127.0 mm) wide aluminum alloy sheave with self-lubricating bearings. Split tube for easy removal after cable is installed.

Cable Tray Roller. No loose pieces. Adjustable legs to fit onto tray width sizes of 12" (304.8 mm) to 36" (914.4 mm). Mounting system above tray. 4 conveyer roller guide with 2 retained spring pull-pin release to easily remove cable from both sides. Closed conveyer roller guide that traps cable with

Hook-Type Sheave 4,000 Pound Capacity. 18" (457.2 mm) hook sheave with 7" (177.8 mm) minimum radius. Strong, welded steel frames. Forged steel closure-type hooks with 1" (25.4 mm) opening. 5" (127 mm) wide aluminum alloy sheaves with self-lubricating bearings. Select a sheave with a maximum rated ca

Hook-Type Sheave 4,000 Pound Capacity. 12" (304.8 mm) hook sheave with 3-5/16" (84.1 mm) minimum radius. Strong, welded steel frames. Forged steel closure-type hooks with 1" (25.4 mm) opening. 5" (127 mm) wide aluminum alloy sheaves with self-lubricating bearings. Select a sheave with a maximum rate

Feeding Sheave for 4" Conduit. Yoke frame slides into the end of conduit and holds sheave, allowing the cable being fed into the conduit to smoothly roll over the sheave. 5" (127.0 mm) wide aluminum alloy sheave with self-lubricating bearings. Split tube for easy removal after cable is installed.

Hook-Type Sheave 4,000 Pound Capacity. 24" (609.6 mm) hook sheave with 9-13/16 (249.2 mm) minimum radius. Strong, welded steel frames. Forged steel closure-type hooks with 1" (25.4 mm) opening. 5" (127 mm) wide aluminum alloy sheaves with self-lubricating bearings. Select a sheave with a maximum rat