Arlington

Siding mounting kit with built in electrical box. 6.8 cubic inch box.Kit includes NM cable connector. 4 mounting screws. For 1/2" lap siding double 4". 6.9 x 10.2 mounting surface.

Zero to 90 degree non metallic liquid tight connector for type B only. 3/4" Trade Size. Adjusts for all angles from 0 to 90 degrees by simply loosening the center nut, twist to the correct angle and then retightening the nut.

Liquid tight concrete tight zinc fitting for PVC jacketed MC cable and tech90 cable. Cable Range .415 to .565. 1/2" Trade Size.

Plastic, 1/2" knockout size Push-in connector with divider to separate cables snaps into knockout using light finger pressure, holds wires securely and is simple to remove with the twist of a screw driver.

EMT Insulating bushing, press fit, holds firmly in place while pulling cables. Trade Size 1/2"

Plastic, 1" knockout size Push-in connector snaps into knockout using light finger pressure, holds wires securely and is simple to remove with the twist of a screw driver.

1" All Plastic snap-in type for knockouts.

Strut Clip for conduit on Arlington's non metallic QuickLatch? pipe hangers. For 1" EMT, 1" Copper Tubing.

Works on all siding types. Before or after siding is up, Mounting holes on inside of box. Textured paintable surface. NM cable connector provided. 6-1/2 x 6-1/2 mounting surface. Provides a .895 J-channel. 15-1/2 cubic inch box. With Flange.

Strut Clip for conduit on Arlington's non metallic QuickLatch? pipe hangers. For 2-1/2" Rigid, 2-1/2" EMT, 2-1/2" Liquid Tight, 2-1/2" Flex.

Arlington's The Loop. Hanger for communications cable, fiber optic cable and any low voltage cable. Versatile mounting, rotates to any angle. Can be stacked perpendicular or parallel. Loop size is 2-1/2". Listed for use in environmental in use spaces. UV Rated. Color Gray.

Plastic, 1/2" knockout size Push-in connector snaps into knockout using light finger pressure, holds wires securely and is simple to remove with the twist of a screw driver.

Non-metallic single gang box for use with our SLIDERBAR (p/n: SL18). Box can be mounted vertically or horizontally. Comes with 1-gang box, installation screws, and slider clip. SLIDERBAR not included.

Duplex zinc die-cast, 1/2" Knockout MC cable connector snaps quickly on to the conduit with a removable screw in spring steel clip and then snaps into knockout with external spring steel clip, no tools required. Concrete tight when taped. Comes with Insulated throat.

Insulating bushing, press fit, holds firmly in place while pulling cables. Can also be used for Rigid, IMC, and PVC rigid conduit. Trade Size 3"

One Box Non-Metallic outlet boxes. Three Gang. Vertical. 61.0 cu. in.